Jiaxing bearing sharing: belt transmission installation requirements and use

There is rotational, have HRB bearing ( ) Jiaxing bearing sharing: belt transmission installation requirements and use. Jiaxing bearing group sales co. , LTD. ( The company) Is jiaxing bearing factory set up in the spot sales window, specializing in HRB brand bearings, facing the whole country, the existing stock 50 million yuan, covers the whole bearing, have very strong cash supply ability. （ A) Should narrow in installing a transmission belt, two rounds of pitch to the belt cover up, and may not be hard to pry, so as not to take damage reduced service life. （ 2) When installing pulley, two rounds of axis must be parallel; The center line of the wheel groove must also for, otherwise it will cause premature wear triangle working face side. ( 3) Choose belt, type and nominal length may not make a mistake, in order to make sure the triangle section of slot in the correct position again. （ 4) Triangle in the same drive the root of the number is large, can not use the old and new, different, different length of the belt, avoid to avoid uneven load distribution, speed up with wear. （ 5) Keep a tape with mineral oil, acid, alkali and medium contact, so as not to spoil. Unfavorable also exposure in the sun. （ 6) In order to guarantee safety operation, drive belt must use shield block up. Belt drive generally divided into parallel belt drive, triangle transmission and synchronous cog belt. 24-hour customer service hotline: if you are more interested in jiaxing bearing the author introduced the industry information or have any questions, please click on contact us page on the right side of the online customer service, or call:, you close the way of jiaxing bearing purchasing advisors. - - - - - - - - - - - Editor: jiaxing bearing sourcing consultant LTD. All rights reserved, The company) Reprint please indicate the source