How to remove the tight sleeve and withdrawal sleeve bearing?

Set a tight round nut tight bearings, the withdrawal of the opposite. Concrete realization method is a different place, thread set set for in thin place, and sleeve in the thick place. That how to remove the tight sleeve and back on the sleeve bearing? China bearing network according to understand, to share the following. How to remove the tight sleeve and withdrawal sleeve bearing? Remove the set on a set of bearing for installation in tight small bearings on the shaft sleeve with straight body, can use a hammer to tap on a uniform effect on the bearing inner ring end face of small steel blocks to remove ( FIG. 1) 。 Before this, needs to be tight sleeve lock nut loosen several times. Figure 1 for installation in tight match on the small ladder shaft bearing sleeve, can use a hammer through a special socket percussion set set of small face to remove lock nut ( FIG. 2) 。 Before this, needs to be tight sleeve lock nut loosen several times. Figure 2 for the installation on the tight sleeve with ladder shaft bearing, using the hydraulic nut bearing removal and simpler. This must be close to the hydraulic nut (piston position to install the right stop Figure 3) , oil injection method is more simple and easy method, but it must be used with set oil hole and the groove. Figure 3 remove retreat on the sleeve bearing remove back the bearing on the sleeve, must remove the locking device. ( Such as a lock nut, end plate, etc. ) For small and medium-sized bearings, can use the lock nut and hook spanner or impact wrench to remove ( Figure 4) 。 Figure 4 for the installation on the withdrawal of large bearings, can take advantage of the hydraulic nut easy disassembly. Suggestions on the shaft end (hydraulic nut installed behind the stop FIG. 5) 。 Can prevent the withdrawal of the stop suddenly separated from the fit position, hydraulic nut on the shaft sleeve and fly back out. Figure 5 [ Warm prompt. 【 The bearing network] Some information from the Internet, and strive to secure timely, accurate, aims to deliver more information, does not represent our views to its approval or responsibility for their authenticity. If this net reprint information involves the issues such as copyright, please contact with this net. Tel: 0571 - 81630205. Tags: install and remove