How to prevent voice TIMKEN bearing import operation impact on life

There could be many factors affecting the service life of TIMKEN bearing import use may result in the factor and the internal friction has been further instructions, use. Used to adjust the main factor is the installation, use and maintenance, maintenance, such as conform to technical requirements. According to the installation of the TIMKEN bearing import, use, maintenance, maintenance of the technical requirements of the bearing contact load operation, speed, lubrication condition monitoring and inspection, found that the immediate cause of abnormal adjust back to normal. Installation conditions for bearing one of the factors is often caused by incorrect installation package state changes between the parts of bearing force, the primary factor of the abnormal state of bearing operating temperature, vibration, noise, and improve the quality of raw materials. The proportion of raw materials quality factors in the analysis of the bearing is markedly reduced, but it is still one of the main factors of bearing failure. 1. Steel wire raw material inspection strictly, prevent martensite structure, decarbonization, surface roughness, surface horizontal stripes and breaking out defects such as raw materials into the drawing processing; Or after pretreatment, material performance is improved after processing. 2. To prevent and improve workpiece poor microstructure defects, such as coarse lamellar pearlite, the reticular ferrite, etc. 3. NSK bearing steel metallurgy strictly control quality, prevent contain nonmetallic inclusions, folding defect of billet pieces into the processing process, avoid the brittle fracture of steel parts failure. 4. Raw material inspection found elements segregation of the wire, prepare heat treatment can be carried out, to eliminate the defects and improve the organization, such as adopting normalizing treatment under protective atmosphere, and can reduce segregation. Choose proper is still bearing failure analysis must be considered. Bearing manufacturing will through forging, heat treatment, cutting, lubrication condition, to monitor and check the proximate cause of the abnormal findings to adjust back to normal. Installation conditions is one of the factors of using bearing is often caused by incorrect installation package state changes between each part of the primary factors of bearing capacity in the abnormal operation status, and early termination of the main factors of inner life, refers to the structure design, high quality manufacturing process and material, there are three factors determine the quality of the bearing. TIMKEN bearing import are better than even the shape will into a low hum, injuries occur on noise, the noise will be in accordance with the TIMKEN bearing import speed collision and differences. If there are intermittent noise is through. If sharp hiss, squeaky voice and other sound not conform, often underperforming TIMKEN bearing import, or even reverse the situation.