Joint bearing technology
Joint bearing technology
PRODUCT
How to prevent damage of rotary cultivator universal joint - bearing knowledge
by：Waxing
2020-06-21
When rotary cultivator universal joint damage are common.
According to the survey, the main reason for the rotary cultivator universal joint damage: one is the improper use, 2 it is installation is not correct, 3 it is incorrect cardan shaft and shaft sleeve, four is not in a timely manner in accordance with the provisions for maintenance, five is out no ascension or not, etc and the turn to turn.
Rotary cultivator universal joint damage prevention measures are as follows: the stones of unfavorable use rotary cultivator, it is best to use other machines and cultivation;
Start and joint power first, and then slowly falling farm tools, rotary cultivator blade in advancing slowly the grave;
Choose the cardan shaft and shaft sleeve length should be, farm tools model matching with if it is too long, in use will be very bad transmission parts, short rises tools will emerge;
Universal joint installation, fork clamp mouth should be in the same plane, to ensure that the knife shaft rotating force uniform, or drive a damaged;
On time according to the requirements for lubrication and maintenance, don't leave out oil all lubricating points greasing, preventing the early damage due to dry friction;
Farm implements hoisting height should be locked, when using a hydraulic control rotary tillage blade height should not exceed 20 cm from the ground;
Must improve the turn tools, otherwise easy to damage the transmission;
At work, cardan shaft and transmission plane Angle should not exceed 10 °, otherwise the shipment efficiency drops, and easy to damage, farm tools after ascending the Angle should not exceed 30 °, otherwise it is easy to damage the universal joint.
Custom message
Related Products
