Use of stainless steel materials
Use of stainless steel materials
PRODUCT
FAG bearing lubricants knowledge of inspection method, the bearing
by：Waxing
2020-05-25
With little lubricant in friction between two fingers, and if the presence of pollutants, can be felt;
Or in the back coating lubricant, then seal optical inspection.
Used engine oil lubrication FAG bearings after xie used engine oil, if possible, shall be impregnated with fresh oil and let the machine in low speed rotation for a few minutes.
As far as possible make the oil collecting residual pollutants, and then purging in addition to the oil.
Note: the oil before use it's best to filter it.
And the use of grease lubrication FAG bearing in replacing grease, Joe used in addition to the machine should avoid with cotton material come into contact with any part of the FAG bearings.
Because these residues fiber may wedged in between the scroll and damage, especially the application of small bearing more need to pay attention to this problem.
Check the FAG bearing, don't let bearing exposure to pollutants or moisture environment.
If the job is interrupted, should with oil or similar materials cover paper plastic film machine.
Custom message
Related Products
