Too much oil in the bearing and box will cause the bearing to slip
Too much oil in the bearing and box will cause the bearing to slip
PRODUCT
To use the linear bearing
by：Waxing
2020-11-20
Proper use of linear bearing linear bearing if improper use can result in bearing damage, shorten the service life of bearing, reduce the efficiency of mechanical equipment.
So proper use of the bearing is especially important, should not be ignored.
1, to pay attention to the bearing bearing should be clean before installation.
Keep the bearing and the surrounding clean.
2, to pay attention to the dismantling of bearing installation, use a special tool to auxiliary sell straight uniform pressure into, remember do not hammer percussion, specifically prohibit direct bearing on tap.
When bearing race with a hole loose, should be to repair or replace the bearing seat holes, not on the surface of bearing with pitting or mat copper sheet, how to continue to use again.
Bearing removal should be used when appropriate to pull pull the bearing, not with chisels, hammer percussion bearing, etc.
If careless when using, can cause a scar linear bearing, indentation, fracture and other damage.
3, should pay attention to the bearing lubrication is commonly used linear bearing lubricant has two kinds of lubricating oil and grease.
When the peripheral speed of the shaft is smaller than 4 -
5 m/s, or the car cannot be used lubricating oil, lubricated by grease.
4, pay attention to the bearing rust.
Should avoid to use in damp places, but also to avoid the sweat on the bearing, so touch gloves should be worn linear bearing.
Custom message
Related Products
