There are several reasons for wear and tear of the bearing

Influence enterprise several main cause of the high temperature bearing wear and tear corrosion damage: high temperature bearing with water, alkali, acid, liquid and harmful gas such as salt and not temporary contact on mobile devices. Corrosion or corrosion caused by corrosion damage called corrosion damage. Detailed reasons are as follows: high temperature bearing wear and tear of the friction on the surface of the tiny peak valley mutual extrusion, the brittleness gradually decrease and the wear appearance. ( 1) Work under the high temperature bearing overload at high speed, the peak valley because of friction and high temperature, the contact point of the hardness and wear resistance, adhesion and tear. The wear and tear is called friction heat and wear. ( 2) The hard abrasive particles. If high temperature bearing is relative motion. The existence of hard particle, or movement between the appearance of the high temperature bearing, with sand, friction, chips and other impurities, the relative movement of bearing high temperature, hard particle or impurities can make high temperature bearing wear appearance, groove, this is the so-called hard particles. Cars with high temperature bearing ( 3) Oxidation wear and tear. Since the smooth high temperature bearing manufacturers need to point out that through high temperature bearing appearance related to sport tiny peaks and troughs and oxidation technology in the air can be separated in together, constitute a kind of brittle oxide, it enterprises and the base metal without strong research separation in together. Oxide more easily in the process of friction problem is shattered and its wear called oxidation wear. （ 4) Pitting corrosion and wear. Gears, bearings and processing for greater contact pressure periodically, such as high temperature rolling contact surface. After the action of a cycle is long, in the metal surface fatigue phenomenon, lead to the appearance of the high temperature bearing fine cracks and corrosion. Wear what is known as the pitting corrosion and wear. Metals metallographic analysis of the organization or changes in the chemical composition of the high temperature bearing reduces the enterprise to carry on appearance of wear resistance and hardness, accelerated wear the research process. Rust or corrosion, wear make up the chemical structure of corrosion. High temperature bearing appearance by acid, alkali corrosion, salt water or gas to produce harmful substances. It speeds up the wear experiment process, namely chemical corrosion serious wear and tear. The abrasion of material called a high temperature wear and tear. High temperature wear provoked. When high temperature bearing company temporarily working under high temperature. On the smooth problems such as high bearing price, farewell calls advisory information. Light has very good effect to the high temperature bearing, its adhesion, abrasion resistance, temperature tolerance, anti-rust and smoothness are good, can improve the high temperature oxidation resistance, delay aging, can dissolve carbon deposition, avoid the separation of metal dross and grease, improve mechanical wear resistance, pressure resistance and corrosion resistance. Generally speaking, the high temperature bearing smooth solution is based on the time. Equipment suppliers usually according to the running time to develop smoothly. In addition, equipment suppliers often include smooth on fuel consumption in the maintenance plan of instruction. For workers, short-term changes smooth oil is a common, often add too much fat. The previous: stainless steel bearing the cause of the high temperature a: no