High speed bearing grease
High speed bearing grease
PRODUCT
The lubricating oil additives play its effectiveness
by：Waxing
2020-11-14
The lubricating oil additives play its effectiveness, how to make these additives maximize its effectiveness?
Driver when choosing additive must do the following: according to the vehicle condition, choose different type of additive: new and tens of kilometres but no cars burn oil phenomenon, mainly type curing of coating products;
Old car type to repair products, but try not to just some slight burn oil phenomenon with strong repair products.
Should be over the same period of oil change when added to make it with the oil injection at the same time, the first injection of additives, after oil injection, the aim is to avoid the oil level is too high.
Bearing dealers 1, old car should be performed in the lubrication system add after cleaning.
2, the best in the condition of heat engine to add, injection should operate according to the requirement of the specification.
3, car of ternary purification unit, do not use leaded additive type and phosphate, lest cause three yuan catalysts' toxic 'failure.
However, is only part of the trace containing phosphorus and zinc additives can be used, namely the content of phosphorus and zinc were less than five over one million (
500PPM)
Driver friend, I still recommend using environment-friendly additive as well.
Custom message
Related Products
