HRB bearing, tapered roller bearing wear failure mode

Jiaxing bearing group sales co. , LTD. , is the spot sales center of jiaxing bearing factory, specializing in HRB bearings, application in production design and related machinery has a wealth of technical experience, today we are together and we learn the tapered roller bearing wear failure mode. Tapered roller bearing in the process of work, because the roller and rolling and sliding motion between the inner and outer ring raceway, keep sliding movement between the frame and the guide surface, cause the bearing surface of the metal loss phenomenon called bearing wear. Concrete can be divided into the following points: 1, the adhesive wear of rolling element bearing with inner and outer ring raceway, cage and lead plane, between cage and rolling body movement, as a result of the solid-phase welding on the contact surface of material from one surface to another phenomenon called read aloud on the surface of the wear and tear. 2, abrasive wear of bearing friction surface into the external hard particles or fatigue spalling from metal fine scales, in the process of friction caused friction surface metal falls off phenomenon called abrasive wear. 3, corrosion and wear in the working process of the bearing, friction surface with the surrounding medium chemical and electrochemical reactions occur, causing wear phenomenon called corrosion wear. 4, the fretting wear between the contact surface of bearing parts, due to the small amplitude vibration type quite a movement of wear phenomenon called fretting wear. 5, fatigue wear bearing fatigue failures of pitting spalling is called fatigue wear. If you are interested in the above jiaxing bearing factory introduction of HRB bearing or have any questions, please click on contact us page on the right side of the online customer service, or call: 4006578186, jiaxing bearing retail center you full thoughtful procurement consultant. - - - - - - Editor: HRB bearing sourcing consultant LTD. All rights reserved, Retail sales center) Reprint please indicate the source