Bearing safekeeping - bearing knowledge

Keep bearing must first fully take into account the care of bearing the weight, the size of the second it is necessary to consider transport space and equipment, to ensure the bearing store and access without collision. Bearing not placed directly on the ground. So, you want to configure the appropriate shelf, and the bottom layer of the shelves should be 30 cm above the ground. In the condition of normal packing, because of the storage environment different, antirust effect for 13 years. Special cases need to keep in recent 10 years, can take in ( As the bearing lubricant) Preservation method of turbine oil and other oil. ( A) Bearing homework installation method of bearing has a lot of, the same processing operation after installation. Bearings after installation, be sure to use outer ring tilt coated bearing lubricant. { TodayHot} 1) Lubricant coating 1 grease lubrication coating cover all roller surface, besmear after will recover the location of the outer ring. 2 all the oil when the oil lubrication coating roller surface, besmear after will recover the location of the outer ring. 2) After coating, with plastic film covering the dust, etc. ( 2) Remove the bearing considerations bearing removal is in preventive maintenance or operation involved when an exception occurs need to replace the bearing. Preventive maintenance need to change the bearing of the bearing often, removing bearings to understand the cause of the anomalies, in order to prevent the abnormal happen again. At least to keep the following items. 1 used to collect and retain lubrication are reserved to the 2 damage of bearing 3 work abnormal events recorded in 4 reserves the bearing case records in abnormal operation