6008 / HR11TN non-standard bearing advantage is introduced

6008 / HR11TN non-standard bearings, source advantage bearing | last updated: - 2020 06 - 12 6008 / HR11TN non-standard bearing advantage introduce non-standard bearing capacity is mainly used to bear radial load. Non-standard bearing type is common in our daily life. Non-standard bearings is mainly composed of a pair of ring, is a set of cage and the combination of a set of steel ball. It has a simple structure, simple installation, easy to use and very common mode of production. It is widely used all over the country. Your understanding of the bearing capacity and the friction of non-standard bearing? Bearing the durability and friction for the use of the bearing is very important, so please be sure to understand before use. Non-standard bearing capacity: non-standard bearing capacity is mainly used to bear radial load. But it can also be in a certain amount of axial load in either direction. When bearing radial clearance increases within a certain scope, the characteristics of this kind of bearing with angular contact ball bearing, and also can bear larger axial load. Non-standard bearing friction: compared with the same size of the other types of bearing, non-standard bearing small friction loss, high limit speed and thrust ball bearing is unfavorable to a higher level. Speed. In this case, this kind of bearings can be used to carry pure axial load. If improve the manufacturing accuracy, and the bakelite, bronze, aluminum and other materials of the solid cage, the speed can also be improved. Knowledge of the bearing capacity of non-standard bearings, we can know, non-standard bearing more practical, use more harmonious. Non-standard bearing friction information tells us that the speed of the bearing can withstand at run time. Only have a comprehensive knowledge of bearing, in order to better use of bearings, bearing performance and play better. Non-standard bearing friction maintenance skills of non-standard bearing role is to make the non-standard bearing retaining ring and rotating ring with the fixed part ( Usually bearing) And rotating parts ( Usually bearing) Consolidation together. Axis) 。 Collectively, completed in the condition of rotating transfer load and determine the position of the sports system relative to a fixed system of basic tasks. Non-standard bearings need to be in the radial, axial and tangential direction of three general its position on the shaft and bearing housing. Radial and tangential positioning by closely cooperate with double row of non-standard bearing ring. The axial positioning used only in a few cases; Usually use the tight fit; Usually use the axial limit components, such as end cover and retaining ring, limit the axial location within the scope of the clearance.