Application of oil-free bearings
PRODUCT
Thrust KOYO bearing inspection after installation
by：Waxing
2020-09-21
Installing a thrust bearing, shaft circle shall be checked and verticality of shaft centerline.
Method is to fix the dial gauge box shell end face, make the table touch the top of the head in KOYO ring raceway on bearing axis rotation KOYO bearings, and observe the dial gauge pointer, if the deflection of the pointer, shaft ring and shaft centerline is not vertical.
Box shell hole deep, also can use extended dial gauge head test.
Thrust bearing installed correctly, the seat can automatically adapt to roller rolling, to ensure that the rolling elements located at the top and bottom ring raceway.
If installed backwards, KOYO bearing not only don't work properly, and the matching surface will badly worn.
Due to axial ring and seat and the difference is not obvious, the assembly should be extra careful, do not make a mistake.
In addition, the seat of thrust bearing with KOYO bearing holes should also be left between 0.
2 -
0.
5 mm clearance to compensate parts processing, installation error caused by inaccurate, when running in KOYO bearing ring center migration, the clearance can be adjusted to ensure the automatic, the avoidance of friction, make its normal operation.
Otherwise, will cause the KOYO bearing severe damage.
Custom message
Related Products
