Performance Comparison Of Three Common Bearing Materials
Performance Comparison Of Three Common Bearing Materials
PRODUCT
The essential differences for the radial and thrust bearings
by：Waxing
2020-10-08
For rolling bearing, we know that the type is very much points according to the rolling direction of axis of the main load bearing, China bearing network tell everybody, mainly divides into the radial and thrust bearings, radial bearings can withstand radial bearing and shaft vertical load.
Some radial bearing capacity of pure radial load, and most of the radial bearing can also carry axial load in the same direction, in some cases, also can withstand the axial load in two directions (
Figure 4)
。
Thrust bearing thrust bearing is mainly along the axial direction under load.
According to its design, single-phase or two-way thrust bearing can support of pure axial load,
FIG. 5)
And some can be subject to an additional radial load (
Combination load, figure 6)
。
Radial bearing thrust bearing cannot achieve with size as high rotation speed.
Contact Angle (
Figure 7)
Decided to bearing belongs to which category.
Contact Angle is 45 ° or less bearing radial bearing, the other for thrust bearing.
【
Warm prompt.
【
The bearing network]
Some information from the Internet, and strive to secure timely, accurate, aims to deliver more information, does not represent our views to its approval or responsibility for their authenticity.
If this net reprint information involves the issues such as copyright, please contact with this net.
Tel: 0571 -
81630205.
Tags: production and processing
Custom message
Do not allow empty
Do not allow emptyPlease enter a valid e-mail format
Do not allow empty
