Manufacturing method of driven plate assembly
Manufacturing method of driven plate assembly
PRODUCT
The design of the stainless steel deep groove ball bearings
by：Waxing
2020-09-10
The bearing with dust cover with dust cover bearing, suffix for 2 z, dust cover is made of stainless steel.
Jade dust cover of the inner ring shoulders form an extremely narrow clearance, and can withstand high temperature and high speed.
Bearing is mainly used with dust cover, working condition of ring spinning.
If outer ring rotation, the bearing under high-speed operation, can lead to grease leakage.
With seals of the bearing contact sealing ring of the bearing, the suffix for 2 rs1, sealing ring is made of steel skeleton of the oil resistance and wear resistance of nitrile rubber.
The allowed working temperature for the sealing ring - xie
40 to + 100 ℃, and in a short time can be up to + 120 ℃.
Contact type sealing ring seal lip seal the inner ring of the shoulder.
Sealing ring flange on the outer ring groove in the position can offer good sealing effect.
When run seal bearing in extreme conditions, such as high speed or high temperature, may lead to grease, ring and seal leakage between.
If leaks damaging effects on the bearing configuration, is necessary to specially design steps.
Custom message
Related Products
