Regular KOYO bearing lubrication and maintenance knowledge of methods - bearing

KOYO bearing lubrication is the best in the equipment downtime and implementation of the plan and schedule for supplement, at the same time, the old rid grease or empty after drain the old oil out. - - - - - - - - - - - - - - - - - - Before adding fresh grease injection nozzle should be wiped clean. - - - - - - - - - - - - - - - - - - If KOYO bearing KOYO bearing box without injection nozzle, should open the KOYO bearing box cover or end cover, in order to take out the old grease, clean up after, supplement the same type of fresh oil. In order to guarantee the normal operation of KOYO bearings, and we need to check lubricating oil level and oil on schedule, under normal circumstances, the normal oil level should be equipment oil level Windows or mark a third - Two-thirds of the range. Oil compensating way for oil cup, the display of the oil level represents oil compensating ability, and KOYO bearing box oil level of operating requirements are satisfied, oil cup CPC a lower than a quarter of its total volume filling oil may be considered. Inspection and oil filling method, took out a small amount of oil as a sample and fresh oil, has the ability to unit may be considered for oil testing, to ensure that the oil. - - - - - - - - - - - - - - - - - - If sample seemingly cloud-like, so may be mixed with water as a result, namely we often say that oil emulsification, lubricating oil at this time should be replaced. - - - - - - - - - - - - - - - - - - If sample cheng dark color or thick, then may say lubricating oil has begun to carbonization, should be replaced the old oil thoroughly. - - - - - - - - - - - - - - - - - - If possible, use fresh oil to wash oil. Oil change, should ensure that the replacement with new and old the same type of lubricating oil, and expand the content of the requirements of the oil level. Use the lubrication system of oil bath type, if the oil temperature at 60 ℃ ( 140°F） The following, and no pollution of lubricating oil, the replacement of a lubricating oil a year. If the oil temperature in 60 100℃（ 140 - 210°F) Need to change four times a year, the lubricating oil. - - - - - - - - - - - - - - - - - - If the oil temperature in the 100 - 120℃（ 210 - 250°F) , you need to be replaced every month lubricating oil. If the oil temperature at 120 ℃ ( 250°F) Above, the need to replace a weekly lubricating oil.