What are the reasons for bearing "fever"
What are the reasons for bearing "fever"!
PRODUCT
Non-standard bearings manufacturer how sealing lip detection
by：Waxing
2020-11-15
Non-standard bearings manufacturer how sealing lip detection.
Source: bearing | last updated: - 2020
09 -
02 non-standard bearing factory is the sealing lip detection?
Sealing lip for bearing lubrication oil of protection is very important, once the loss of the sealing lip seal performance for the protective effects of bearing grease is greatly reduced, so is very fatal for bearing.
Used in the test failure before and after the failure of bearing sealing lip contrast found that failure of bearing sealing lip thin due to wear and high temperature environment, lose existing sealing performance, especially in high temperature working environment basic lost its sealing performance.
Failure of bearing sealing ring is completely destroyed, completely lost the sealing performance, it will accelerate the bearing failure.
Bearing coating anticorrosive oil method 1)
Soak method: some small items by soaking in antirust oil, make its surface adhesion on a layer of anti-rust oil.
The temperature of the oil film thickness can be controlled by anti-rust oil or viscosity to achieve.
2)
Brush method used for soaking or spraying outdoor construction equipment or not apply special shaped products, brush should not only pay attention to not build up, also should pay attention to prevent leakage.
3)
Spray a few large rust cannot be oiled by soaking method, generally about 0.
7 mpa pressure filtering compressed air spraying where clean air.
Spray method used solvent XiShiXing rust-proof oil or thin layer of anti-rust oil, but must use perfect fire protection and labor protection measures.
Custom message
Related Products
