Lead to import bearing damage

Lead to import bearing damage source: because of the bearing | last updated: - 2020 10 - 15 to imported bearing damage because of rolling bearing, if no selection is not correct to be properly applied, to the service life of the bearing before, can be used for a long time, in this kind of situation, damage to escape. On the other hand, there are also unexpected damage in advance, and can not help the early damage of the application as of the early damage has applied to frighten RunHua considering the shortcomings of which also have dirt intrusion, bearing assembly deviation and axis deflection value, the scientific research of shaft and bearing box, etc. It can be said that the reason the status of the overlap between each other more. Therefore, to master bearing in adequate application of equipment, application standard, bearing field structure basically, if can find out about before and after the security accident, and fusion of bearing damage conditions and to investigate a variety of reason can avoid similar accidents appear again. Who read this article also browse: bearing damage, the root cause and preventive damage: bearing to bear the load rotation, the inner ring, outer raceway surface or with dignity because tired and scrolling display scaly out of condition. Damage reason: too much load. Poor installation ( The parallel linear) The torque load dirt intrusion, ooze water. Poor RunHua, lubricants doesn't fit, the bearing clearance is not appropriate. Poor precision bearings, bearing box non-uniform stiffness, large shaft deflection value, rust, corrosion, scratches, marks ( Surface deformation situation) Lead to the development of the trend. Damage action: check the size of the load bearing and the laboratory application again. Improved installation method, improved sealing equipment, power off when the antirust processing. Use a moderate viscosity of lubricant, improvement RunHua way. Check the shaft and the precision of the bearing. The inspection clearance.