【 Jiaxing bearing 】 The requirements of the blanking die assembly

There is rotational, have HRB bearing ( ) 【 Jiaxing bearing 】 Technical requirements of jiaxing blanking die assembly bearing group sales co. , LTD. ( The company) Is jiaxing bearing factory set up in the spot sales window, specializing in HRB brand bearings, facing the whole country, the existing stock 50 million yuan, covers the whole bearing, have very strong cash supply ability. 1) Good die assembly, its height should comply with the design requirements. 2) Die on mold base load, its axis perpendicularity error of mold base on plane, within the scope of the length is not greater than zero. 05mm。 3) Guide pillar and guide sleeve assembly, its axis vertical degree should be on the bottom of the mold base under the plane and the mold base on the plane. 4) On the mold base on the bottom of the mold base under the plane should be parallel to the plane. 5) Load of the die set each value fit clearance to guide pillar and guide bush should comply with the specified requirements. 6) Assembly good die set, the mold base along the guide pin on the upper and lower movement should be smooth, no blocking phenomenon. 7) Guide post after the assembly, the fixed end and the lower die block plane should retain 1 ~ 2 mm distance, choose B guide bush, after assembling the fixed end is lower than on the mold base on plane 1 ~ 2 mm. 8) Fitting clearance of convex die and concave die should comply with the design requirements, along the edge contour should be uniform. 9) Positioning device to ensure the positioning correct and reliable. 10) Discharge and a flexible device, correct and discharging pore unimpeded, ensure parts and scrap BuKa within the die. 11) Mould should be performed under the condition of producing test, rushed out of the parts should comply with the design requirements. 24-hour customer service hotline: if you are more interested in jiaxing bearing the author introduced the industry information or have any questions, please click on contact us page on the right side of the online customer service, or call:, you close the way of jiaxing bearing purchasing advisors. - - - - - - Editor: jiaxing bearing sourcing consultant LTD. All rights reserved, The company) Reprint please indicate the source