Jiaxing bearing group: rolling bearing failure

【 Jiaxing bearing group 】 Jiaxing bearing group sales co. , LTD. , is the spot sales center of jiaxing bearing factory, specializing in HRB bearings, application in production design and related machinery has a wealth of technical experience, today we are together and we learn of the rolling bearing failure. Fracture failure of rolling bearings, bearing fracture failure was the main reason is that defects and overload two factors. When the loads more than material strength limit fracture caused by parts called overload fracture. Overload reason mainly is the main engine failure or improper installation. Bearing parts of micro crack, shrinkage cavity, bubbles and large foreign impurities, overheating organizations and local burns and other defects during the impact overload or violent vibration will cause fracture in defect, known as defect fracture. It should be pointed out that the bearing in the process of manufacturing, for raw materials into the factory reinspection, forging and heat treatment quality control, process control through instrument analysis of the existence of the above defects and correct still must strengthen control in the future. But in general, usually bearing fracture failure of most for overload failure. If you are looking for the above bearing factory introduction of jiaxing jiaxing bearing knowledge interested or have any questions, please click on contact us page on the right side of the online customer service, or call: 4006578186, jiaxing bearing group you full thoughtful procurement consultant. - - - - - - Editor: jiaxing bearing group procurement consultant LTD. All rights reserved, Jiaxing bearing group) Reprint please indicate the source