Overview and Application of Equal Section Thin Section Bearings
Overview and Application of Equal Section Thin Section Bearings
PRODUCT
How to install the self-aligning bearing
by：Waxing
2020-09-21
For the self-aligning bearing, the shaft bearing load case shaft hole, using middle ring installation can prevent the outer ring tilt and rotate.
Should keep in mind that some of the size of the self-aligning ball bearing of ball protrudes from the side of the bearing, so the middle ring should be recessed installation, in case of damage to the ball.
A large number of bearings are generally use mechanical or hydraulic pressure into the method for installation.
Type for the separable bearings, inner ring and outer ring can be installed separately, thus simplify the installation process, especially when the inside and outside the circle must be especially interference fit.
In the inner ring has been installed in place of the axial load including outer ring of bearing box, must pay attention to see if inside and outside the circle to the right, in order to avoid scratch bearing raceway and rolling parts.
If a cylinder and needle bearing with without the inner ring or side of the flange rim flange edge of the inner ring, it is recommended to use to install the sleeve.
Outside diameter should be equal to the inner ring raceway diameter of sleeve F, machining tolerance standards shall be the d10.
Custom message
Related Products
