How FAG bearing import - bearing lubrication knowledge

1. FAG bearings imported oil bath smooth smooth oil bath is the most import FAG bearing in the ordinary way of smooth, suitable for low and medium speed bearing is smooth. Imported to FAG bearing local immersed in the tank, with smooth oil by the rotation of the bearing parts, then flow back to the oil level of oil tank should be slightly lower than the lowest in the middle of the roller. 2. FAG bearings imported drip drip smooth smooth suitable for the need to ration the smooth oil imported FAG bearing parts, drops of oil every 3 - individually A drop of it is advisable to 8 seconds, too much oil will cause the bearing temperature increased. 3. FAG bearings imported circulating oil slick with oil pump will be filtered oil walks to the imported FAG bearing parts, through the bearing smooth oil filter cooling after use. Because circulating oil can take away heat, must make bearing cooling, therefore method suitable for high speed bearing parts. 4. FAG bearing import spray smooth with dry shrinkage by air sprayer and smooth oil mixed oil mist, radiation FAG bearing imports, in air can be effectively and cooling the bearing can avoid intrusion. This method is suitable for high speed and low temperature bearing parts is smooth. 5. Radiation smooth with imported FAG bearing oil pump will come into your FAG bearing import the oil in the low pressure of nozzle, into the bearing of the bearing at the other end into the oil in the tank. When bearing at high speed, rolling body and maintain frame to match the rotation of the high speed air cause air flow around, it is hard to smooth the oil to the bearings in individual smooth way, then must smooth oil spray with low radiation to bearing, the status of the nozzle should be placed in the middle of the inner ring and maintain frame between.