Customs clearance
Customs clearance
PRODUCT
Honda accord car wheel hub bearing sound before
by：Waxing
2020-11-16
Honda accord car wheel hub bearing before sound - 2018
07 -
10 a mileage is about 10.
The 2011 guangzhou Honda accord car 80000 km.
The vehicle before using in the wheel hub bearing ring fault phenomenon.
After a repair shop to replace the front wheel hub bearing, and ABS warning light normally on failure.
Troubleshooting: first check with conventional detection methods.
Disconnect after the ignition switch, unplug the ABS control unit plug wire side, check the wire side plug the power cord and adapter on often iron terminal, all normal.
Switch on the ignition switch, measuring terminal (16
ABS incentive power terminal)
With iron voltage is normal.
So connected to the ABS control unit plug wire side, measure the resistance of the wheel speed sensor, the resistance are & infin;
。
Doubt the original repair shop in front of the replacement of the wheel hub bearing accidentally will wheel speed sensor wire broken, but the measurement on the wheel speed sensor end its resistance, the result is not in two.
Refer to paragraph 2011 of guangzhou Honda accord car circuit diagram, the vehicle ABS wheel speed sensor is different from other cars, it is installed on the front wheel hub bearing internal sealing a magnetic ring type encoder, tooth ring instead of the other car wheel speed pulse.
Check the front wheel hub bearing, found the direction of the encoder installed backwards.
According to technology requirements when installing front wheel bearing after the commissioning, troubleshooting.
（
Note: the graphic)
Custom message
Related Products
