What types of bearings are used in port lifting machinery?
What types of bearings are used in port lifting machinery?
PRODUCT
Beijing 130 type car shaft guide bearing removal methods
by：Waxing
2020-09-19
Beijing 130 type automobile engine crankshaft backend transmission -
—
Shaft guide bearing damage after remove the way: the bearing is 6203 type ball bearing, first remove the transmission, and clutch and the flywheel, and then use screwdriver to pick out the rubber oil seal;
If it was iron oil seal, with sharp shovel can its spine broken and pick out a little, with carp pliers clamp, immediately pull out.
After second, remove the oil seal, with large word screwdriver on bearing bead, the beats with the hand tap the screwdriver handle, make bead to close together, all together, the bearing inner ring can be removed.
Then hold onto the inside of the bearing outer ring with a lever, stand hard to move for the crankshaft flange, strength is not enough available hammer knock the power end of the lever, pry while rotating crankshaft, bearing outer ring evenly to pry out, until remove the outer ring.
This method is available steam welding, welding tools, such as have the advantage of time, simple, easy to operate.
Custom message
Related Products
