Common identification methods of bearings
Common identification methods of bearings
PRODUCT
Bearing manufacturer to introduce to you the use of non-standard bearing considerations
by：Waxing
2020-11-15
Bearing manufacturer to introduce to you the use of non-standard bearing note source: bearing | last updated: - 2020
07 -
23 bearing manufacturer to introduce to you the use of non-standard bearing note 1.
Normal use after one year should replace 2 # spindle oil and coarse fine filter.
2.
Normal using pump station to make up for the oil must be 3 layer filter for silk cloth.
3.
When spindle pulley, wheel loading and unloading must be under the conditions of pumping station operation.
The spindle under the conditions of static pressure oil float.
So don't damage the spindle and dynamic pressure bearing.
4.
Grinding wheel spindle survey 'before the pump pressure and the grinding head can static pressure in a standard size.
5.
Equipment mainly;
Must be stopped first grinding head motor;
After waiting for grinding wheel stopped;
To turn off the pump station;
Or simple grinding head injury.
6.
In the pump station of any components.
Must first removing the high pressure oil inlet hose connection;
After replacing the parts;
Rear oil loop of 15 ∽ 20 minutes into the tubing can be connected to grinding head;
Thus ensure the into the grinding head spindle oil is super clean spindle oil through fine filtering.
Doing so can extend the use of dynamic pressure spindle longevity.
”
Custom message
Related Products
