Can the bearings continue to be used after they are worn?
Can the bearings continue to be used after they are worn?
PRODUCT
Two groups of insert ball bearing unit is smooth
by：Waxing
2020-11-12
Bearing as the major parts of the mechanical equipment, its types and smooth type is also has a lot of, today the bearing is mainly introduced the related smooth type insert of the spherical bearing.
Insert ball bearing unit is smooth, there are two major varieties of type a smooth method is called oil mist is smooth, the other is a trace of smooth, simple I mean with very few smooth oil to meet smooth request of insert ball bearing unit.
Oil mist is smooth smooth oil into oil mist in the onset of oil mist device, after oil mist of bearing stop smooth.
Due to the oil mist in the surface of the insert ball bearing unit homework agglutination oil drops, insert ball bearing unit is still insist on practice thin oil slick, this position can extend the set-contained spherical bearing life spans.
The warm prompt use the smooth bearing network method should pay attention to the following two points: 1.
Oil viscosity to choose general should not be higher than 340 mm/s (
40 degrees)
Due to the high viscosity will reach atomization effect.
2.
Smooth the oil mist may be locally with the degradation of air, will pollute the environment.
Oil and gas separation device to collect oil mist if necessary, may choose to remove exhaust ventilation equipment.
When bearing churning body linear velocity is very high, often choose oil mist is smooth, smooth method in order to prevent the other due to too much oil, oil increased the internal friction increases set-contained spherical bearing operating temperature.
Ordinary oil mist pressure is about 0.
05-0.
1mbar。
Custom message
Related Products
