PRODUCT
NSK bearing motor rusty reason - bearing knowledge
by:Waxing
2020-06-08
Causes of NSK bearing motor rust is complex, may be bearing anti-rust treatment is bad, can also be caused by moisture corrosion, and corrosion caused by the mist.
Most electric insulating varnish used evaporate off acid composition mainly has four kinds: (1) did not react low molecular paint raw materials acid (
Without water adjacent and terephthalic acid, maleic acid water, trans butylene acid)
。
(2) the paint curing generated when acid composition,
Phenolic resin modified with the lacquer, the formaldehyde water into formic acid)
。
(3) heat generated or oxidation decomposition of low-level fatty acids (
Formic acid, acetic acid)
。
(4) paint curing water decomposition generated after acid composition.
Insulating paint produce formic acid is the main acid composition, the number of formic acid has a close relationship with degree of corrosion occurs.
Grease adsorption evaporates acidic constituents of the paint cause metamorphism, grease and the acidic component and promote the hydrolysis of oils and fats, acid concentration increased as a result, NSK bearings caused by corrosion.
The working principle of the grease, is the use of oil layer of steel ball is separated from the internal and external raceway, using viscosity properties of oils and fats, attached to the surface of steel ball and raceway, separating the metal interface of ball and the inner and outer raceway, reduces wear on the metal surface and protect metal from air and water corrosion, reduce the vibration and noise, make the rotation of the bearing can be smooth.
But after grease metamorphism, viscosity will change, oil film wear, the separation function and adhesion properties of the grease will disappear, such consequences, one is made of insulating varnish acid composition, direct oxidation of metal surface cause bearing corrosion.
2 it is to cause the steel ball in contact with the inner and outer raceway straight touch, wear and tear occurs when revolving that cause noise increases.
【
The bearing network]
Custom message