Jiaxing bearing: rolling bearing press installation method

Jiaxing bearing group sales co. , LTD. , is the spot sales center of jiaxing bearing factory, specializing in HRB bearings, application in production design and related machinery has a wealth of technical experience, today we are together and we learn the rolling bearing press installation method. Rolling bearing press installation method: when the bearing diameter increase and interference increases, the amount of available press the bearing pressure equipment in the shaft first, then the shaft together with the bearing load bearing hole, when pressed on the bearing inner ring end face, put a soft metal materials assembled casing ( Copper or mild steel) , the inner diameter of the casing assembly should be slightly larger than the diameter of the shaft neck, outside diameter than the bearing inner ring guard slightly smaller, in order to avoid pressure in keeping the frame. Bearing outer ring and bearing hole tight fit, loose fit, the inner ring on the shaft bearings can be pressed into the bearing hole first, then assembling casing diameter should be slightly less than the diameter of a hole. If the bearing ring and shaft and hole is a tight fit, inner ring and outer ring when installation should pressure into the shaft and hole, at the same time assembling casing structure should be able to at the same time, so the bearing inner ring and outer ring end face. If you are interested in the above bearing factory introduction of jiaxing jiaxing bearing or have any questions, please click on contact us page on the right side of the online customer service, or call: 4006578186, jiaxing bearing retail center you full thoughtful procurement consultant. - - - - - - Editor: jiaxing bearing sourcing consultant LTD. All rights reserved, Retail sales center) Reprint please indicate the source