PRODUCT
【 Jiaxing bearing factory. With the ball deep groove ball bearing gap
by:Waxing
2020-12-07
Jiaxing bearing group sales co. , LTD. , is the spot sales center of jiaxing bearing factory, specializing in HRB bearings, application in production design and related machinery has a wealth of technical experience, today we have put together and we learn the ball deep groove ball bearing gap.
There are deep groove ball bearing of ball gap: standard are installed in the deep groove ball bearing gap series 200, 300 two diameter.
This kind of bearing in the inner and outer ring of bearing on one side, there are gaps, can load more goals, make bearing radial load capacity is greater than standard deep groove ball bearings.
But the axial bearing capacity is small, can't run at a high speed.
If there is a large axial load, the general need and a set of ordinary deep groove ball bearings.
Ribbon ball hole structure of deep groove ball bearings have a variety of forms.
With the structure of the dust cover variant has the advantage that the same as the basic dust cover bearing, bearing after an injection of lithium base grease can be use for a long time.
With locking slot and stop ring structure form, commonly used in automobile transmission, can in the limited space within the limit bearing axial displacement, but also under the condition of little axial load, with smaller size of bearing larger radial load.
If you are interested in the above jiaxing bearing factory introduction of HRB bearing or have any questions, please click on contact us page on the right side of the online customer service, or call: 4006578186, jiaxing bearing retail center you full thoughtful procurement consultant.
-
-
-
-
-
-
Editor: jiaxing bearing factory sourcing consultant LTD. All rights reserved,
Jiaxing bearing factory)
Reprint please indicate the source
Custom message