Bearing science: NSK bearing suffix meaning
A -- Bearings with internal design different from the standard.
PRODUCT
High temperature glass annealing furnace roller bearing lubrication on the solution of the carbon deposition
by：Waxing
2020-11-15
High temperature glass annealing furnace roller bearing lubrication 2020 - on the solution of the carbon deposition
06 -
26 before receiving a glass factory consulting, for the annealing furnace roller bearing factory oil drip, coking carbon deposition is serious, will take 10 days to supplement a grease, once every three months more need to disassemble the bearing cleaning.
After the preliminary understanding situation, optimal embellish engineers to the scene to check equipment, roller bearings belong to the high temperature annealing kiln, average temperature in the 90 -
130℃。
Tear down after the bearing cover, found that the coking carbon deposition is really serious.
Subsequent engineer suggested that the factory use optimal embellish Liplex EP 2 oil to replace the original use oil, the oil has good extreme pressure resistance, water resistance, mechanical stability, anticorrosive, oxidation stability.
Characterized by a high drop point, using temperature range, for a variety of high temperature lubrication is especially suitable for high speed.
Due to customer production needs, unable to stop, so can only replace the grease under the running condition.
Actual measurements of the interior of the bearing temperature is above 140 ℃, then use detergent to clean up the bearing rust, oil, etc.
Clean up after the bearing below: the last in the bearing and the bearing cover filled with grease, assembly, subsequent use add grease gun, out of oil.
At this point, the use of 3 -
Five months to fill a grease, but also did not appear coking problem such as carbon, oil dripping.
（
Source: optimal run special lubricant)
Custom message
Related Products
