World Robot Conference: Robot joint bearings produced in China
PRODUCT
FAG bearing lubrication method of 'big four' - bearing knowledge
by：Waxing
2020-06-14
1.
Oil bath lubrication oil bath lubrication is the most common lubrication method, suitable for low, medium speed, FAG bearing lubrication.
Method is to FAG bearing part in the tank, the lubricating oil by rotating FAG bearing parts take up, and then flow back to the oil level of oil tank should be slightly lower than the lowest at the center of the roller.
2.
Oil drip lubrication oil drip lubrication is suitable for need to ration oil FAG bearing parts, drip oil every 3 - general
A drop of it is advisable to 8 seconds, too much oil will cause FAG bearing temperature increased.
3.
Circulating oil lubrication oil pump in the conversion of the filter oil transfer to FAG bearing parts, by FAG bearing lubricating oil filter cooling after use.
Because of the circulating oil can take away a certain quantity of heat, cooling the FAG bearing, therefore method is suitable for high speed FAG bearing parts.
4.
Spray lubrication with dry compressed air after the sprayer and lubricating oil mixed form oil mist, spray FAG bearing, can effectively make the FAG bearing cooling airflow and can prevent the intrusion.
This method is suitable for high speed, high temperature FAG bearing parts of lubrication.
Custom message
Related Products
