Commonly used terms and definitions in the bearing industry
Commonly used terms and definitions in the bearing industry
PRODUCT
Before installing the bearing cleaning is also very important
by：Waxing
2020-11-14
The service life of wafangdian bearing is suitable for the installation and use of lubricant, but before installing the bearing cleaning is also very important, here is the next pre-installed bearing cleaning method: only open the bearing in the installation package, will immerse in the liquids such as gasoline, turning gently with the hand.
Ensure the cage, rolling element and raceway on the surface of the packing oil be cleaned completely.
After the clean, thin film gloves should be worn, will work on spherical roller bearing on a clean dry cloth or paper.
Then you can install it.
Please keep in mind that when using sealed bearing, the interior of the seal should remain the same.
If found in the assembly of the shaft and bearing hole has concave and convex, burr, rust, or solid particles (
Such as debris, sand, clay, etc. )
, when can file to remove burrs, bump, rust, and emery cloth, polishing, and like a clean and solid particles, dirt, etc.
Bearing manufacturer to clean a lot of bearing, first of all, with the temperature of 90 ~ 100 ℃ will oil into hot oil, make the oil packing at the same time of melt with seamless mouth and remove all the old oil debris, and then shower a few minutes, then kerosene wash the oil, and then clean with gasoline.
Custom message
Related Products
