What Are The Basic Requirements Of Bearing Materials?
What Are The Basic Requirements Of Bearing Materials?
PRODUCT
Bearing cage for common damage
by：Waxing
2020-11-13
Cage bearing as an important component parts, its use effect is very big, bearing in the process of using, cage also often appear some of the damaged state, this will seriously affect the use effect of the bearing, and even lead to bearing damage cannot use completely, China bearing network according to the understanding, the following share some common damage the bearing cage.
Bearing cage common damage are: 1, the damage of cage cage deformation, wreck a wear: 2, column wreck: 3, transverse deformation: 4, wear and tear of the sunken place: 5, wear and tear of the guide: list the bearing cage damaged figure: figure 1, the protection of the deep groove ball bearings, stamping steel cage of sunken wreck.
Figure 2, the centripetal thrust angular contact bearing cage: cast iron cutting system maintains a sunken column wreck;
The reason was that the inner and outer circle tilt installation, on the cage caused by abnormal load.
Figure 3, the centripetal thrust angular contact bearing cage: high-intensity brass casting and cutting system maintains a notch in the wreck.
Figure 4, tapered roller bearing cage: stamping steel cage column of the wreck.
Lead to damage of bearing cage common reasons are: 1, installation is bad (
Non linear bearing)
。
2, use bad.
3, large torque load.
4, shock, vibration.
5, speed is too large, sharp deceleration.
6, bad lubrication.
7, the temperature rise.
Damage of bearing cage common measures: 1, check the installation method.
2, check the load, rotation and temperature conditions.
3, to reduce the vibration.
A bracket will be 4, correct choice.
5, changes of lubricant and lubricant selection method.
Custom message
Related Products
