Ball bearing manufacturers share the series of products!

Ball bearing manufacturers share the series of products! Ball bearing is primarily a single-row radial deep groove ball bearing. In addition to open, the radial deep groove ball bearing with dust cover and seal type, can effectively reduce the foreign matter invasion and grease leakage. In addition, there are easy to install the flange and the retaining ring, and extremely thin axial and radial ball bearings, ball bearings and shaft, shell cover, bearing structure of the guide bearing, etc. 1, radial deep groove ball bearing, R - ,L - 、RI- ) Characteristics: it is the most representative type of radial ball bearings. In addition to the radial load, but also can withstand axial load in two directions. Type: open, dust cover and sealing ring. Units: metric, English system. 2, flange (radial deep groove ball bearing RF- ,如果 RIF - ) Features: has flange on the outer side of the radial ball bearings. The shell cover installation, axis positioning easier. Type: open, dust cover and sealing ring. Units: metric, English system. Bearing on the basis of stainless steel material. 3, with a snap ring radial deep groove ball bearing, RNR - LNR - ) Features: on the outer side of the radial ball bearing with stop ring shell cover installation, the direction of the axis positioning easier. Type: there are open, the dust cover type. Unit: the metric system. Bearing on the basis of high carbon chromium steel material. 4, extremely thin radial ball bearing ( A - ) Characteristics: relative to the outer diameter, inner diameter is larger than general radial ball bearings. Type: there are open, the dust cover type. Unit: the metric system. Bearing on the basis of stainless steel material. 5, the axial bearing ( T- ) Features: can carry axial load. Can't bear radial load. Type: with orbital slot and orbital slot. Bearing on the basis of stainless steel material. Unit: the metric system.