How to maintain the bearings of the machine
How to maintain the FAG bearings of the machine
PRODUCT
To remove bearing surface corroded
by：Waxing
2020-11-16
2018 - remove the bearing surface of corroded method
07 -
11 frequently used bearings, if not regular cleaning, the oil will reduce its service life.
There are readers to recommend the following methods, share with everyone.
Soft dry oil or rust cream hardening bearing, should dip in 100 ℃ ~ 200 ℃ hot oil, clamp bearing with forceps, brush with wool clean oil bearing.
Soft dry oil or rust creams are heated to 100 ℃ ~ 200 ℃, melting, easily washed out of the bearing gap.
Sometimes as long as bearing repeatedly shaking in the oil.
The oil into crevices from.
When clean the bearing centripetal spherical bearing, you should put the ball, pearl horizontal transfer from the outer ring, internal ring into hot oil, again after a short cylindrical roller bearing when cleaning roller, beads, also should be the inner ring and outer ring off.
In the hot oil when cleaning, the oil temperature should not exceed 20 ℃.
（
1)
Surface cleaning: cleaning must be rust in accordance with the nature of the surface and the conditions, select the appropriate method.
There are usually used solvent cleaning, chemical cleaning and mechanical cleaning.
（
2)
Surface available filter after dry clean dry compressed air blow dry, or in 120 ~ 170 ℃ dryer for drying, also can use clean cloth to wipe dry.
Custom message
Related Products
