What is the noun explanation of bearing life and the standard for measuring bearing life
Under a certain load, the number of revolutions or hours experienced by the bearing before pitting is called the bearing life.
PRODUCT
The influence of IKO bearing installation for use
by：Waxing
2020-09-21
IKO bearing installed correctly, a direct impact on the precision, IKO bearings when using life and performance.
Therefore, the design and installation of assembly department for IKO bearing to fully study, carried out in accordance with the operation standard.
Operation standard project usually is as follows: 1.
2 cleaning IKO bearings and related parts.
Check the size of the related parts and precision.
Install 4.
IKO bearings after installation to check 5.
Fill lubricant hope when installed, open the IKO bearing packing again.
Grease lubrication, generally not clean IKO bearings, direct filling grease.
Oil lubrication, generally don't have to clean, however, instrument with or high speed with IKO bearings, etc. , should clean with clean oil, remove rust inhibitor on IKO bearings.
Remove the rust inhibitor IKO bearing, easy to rust, so can't put randomly.
Also, has the IKO bearing grease sealed, not directly use cleaning.
Measures for the installation of IKO bearing for IKO bearing structure, cooperate, conditions vary, due to the more commonly as the axis of rotation, so the inner ring need interference fit.
Cylindrical hole bearing, multi-purpose press pressure into, or hot charging method.
Taper hole, fixed on the cone shaft directly, or use the set set of installation.
Installed to the IKO bearing seat, by clearance fit, the outer ring has interference quantity, usually with press pressure, or the use of cooling after installation method of the cold.
Use dry ice as coolant, the cold installation, the moisture in the air condenses on the surface of IKO bearings.
So you need to take rust prevention measures.
Custom message
Related Products
