Jiaxing bearing | linear rolling ball bearing standard type, installation and adjustment method

There is rotational, have HRB bearing ( ) Jiaxing bearing group sales co. , LTD. ( The company) Is bearing group co. , LTD. Established in jiaxing spot sales window, specializing in HRB brand bearings, facing the whole country, the existing stock 50 million yuan, covers the whole bearing, have very strong spot supply, is the group's retail sales center. A, linear rolling ball bearing type linear rolling ball bearing standard this bearing can be divided into closed type ( Type LBP and LB) , gather ( B。 。 。 AJ type) And open rack ( 磅。 。 。 The OP and LB. 。 。 WOP type) Three. 1) Closed type ( Type LBP and LB) Of the closed type bearing only through, and the tolerance of shaft and bearing to the ball group inside diameter and to adjust the clearance between the shaft. 2) Gather ( B。 。 。 AJ type) Gather bearing width is narrow openings, allowing the ball group internal clearance between shaft and mechanical adjustment. 3) Open mouth ( 磅。 。 。 The OP and LB. 。 。 WOP type) Open mouth part along the axial truncated, so as to provide the bearing clearance on the guide shaft and are free to pass. 'eight' intermediate bearing. Second, the linear rolling ball bearing method linear ball bearings to install pressure into the bearing seat, special installation tool pressure should be adopted by outer end face. Do not allow direct knock bearing, so as to avoid deformation. Gather, closed and open in the correct way to install, and then screw clamp, is used to adjust clearance, be careful not to make the preloading is too large. If you are more interested in jiaxing bearing group co. , LTD. The author introduces the information or have any questions, please click on the website on the right side of the online customer service or call:, you full close jiaxing bearing purchasing consultant company. - - - - - - Editor: jiaxing bearing sourcing consultant LTD. All rights reserved, The company) Reprint please indicate the source