HRB bearing: installation form of angular contact ball bearing

Jiaxing bearing group sales co. , LTD. , is the spot sales center of jiaxing bearing factory, specializing in HRB bearings, application in production design and related machinery has a wealth of technical experience, today we are together and we learn the installation form of angular contact ball bearing. The installation form of angular contact ball bearings, angular contact ball bearing installation form, with back to back, face to face and order three series. Back to back, Two bearing the wide end relative) When installation, bearing of the line of contact Angle along the rotation axis direction spread, can increase the Angle of the radial and axial bearing rigidity, resistance to deformation ability; Face to face, Two bearing the narrow end relative) When installation, bearing contact Angle of the line in the direction of the rotary axis convergence, the bearing Angle rigidity is small. Due to the bearing inner ring out of outer ring, when two bearing outer ring clamp together, outer ring of the original clearance eliminated, can increase of bearing preload lotus; In series ( Two bearing the wide end in one direction) When installation, bearing in a parallel direction and the contact Angle, can make the two share the same direction of work load. But when using this type of installation, in order to ensure the installation of axial stability, two series of bearing must be installed on both ends of the shaft to the. If you are interested in the above jiaxing bearing factory introduction of HRB bearing or have any questions, please click on contact us page on the right side of the online customer service, or call: 4006578186, jiaxing bearing retail center you full thoughtful procurement consultant. - - - - - - Editor: HRB bearing sourcing consultant LTD. All rights reserved, Jiaxing bearing factory) Reprint please indicate the source