Bearing cleaning method

Bearing rust removal method of source: this website the author: the administrator to release time: 2020 - 08 - 13 13:19:25 views: 1 bearing used in construction machinery industry is relatively broad, in the machinery industry is not a part of the less, for bearing fault should be in the process of using the larger value. Bearing after frequent use, also need timely maintenance and maintenance, its main application in automobile cranes, container cranes, deck cranes, excavators, robots and revolving restaurant, etc. The authors introduce everyone to bearing cleaning method. 1, soaking method: bearing by soaking in antirust oil, make its surface adhesion on a layer of anti-rust oil. The temperature of the oil film thickness can be controlled by anti-rust oil or viscosity to achieve. 2, brush method: does not apply to the special shape of soaking or spraying of bearing, brush should not only pay attention do not produce rust-proof oil accumulation, also should pay attention to prevent leakage. 3, spray method: some of the biggest bearing cannot be oiled by soaking method, generally about 0. 7 mpa pressure filtering compressed air spraying where clean air. Spray method used solvent XiShiXing rust-proof oil or thin layer of anti-rust oil, but requires a perfect fire prevention and labor protection. Bearing frequently, rusting problem when using, if bearing rust will directly affect the use of the products, increase the resistance of the product, resulting in normal operation of the bearing. Therefore, daily antirust work is very important for the bearing, we should also regularly to rust removal activity of bearing, the bearing use for a long time there is a larger profit. This article first introduced to here, want to understand the knowledge, can focus on our website.