Jiaxing bearing group small make up for your knowledge for rolling bearing oil bath heating are introduced in detail

There is rotational, have HRB bearing ( ) Jiaxing bearing group sales co. , LTD. ( The company) Is in jiaxing bearing group set up by the spot sales window, specializing in HRB brand bearings, existing stocks of 50 million yuan, covers the whole bearing, have very strong spot supply, today for everyone to introduce knowledge of rolling bearing oil bath heating. The bearing before hot charging type or separable bearing ring into the fuel tank evenly heating 80 ~ 100 ℃ ( Generally, bearing heated to higher than the required temperature 20 ℃ ~ 30 ℃, so that the operation process of inner ring not prematurely cooling) , do not heat the bearing more than 120 ℃, and then loaded on the shaft, as soon as possible out of the oil to prevent inner ring after cooling end face and the shoulder joint is not tight, after the bearing cooling axial fastening, in case the clearance between inner ring and shoulder. Bearing outer ring and light metal bearing seat tight fit, by heating the hot charging method of the bearing, can avoid the mating surface scratch. Heating tank with bearing and application at a certain distance from the bottom of a mesh, or hanging hooks in the bearings, bearing on the bottom, to prevent precipitation impurities into the bearing or uneven heating, fuel tank must have a thermometer, strictly control the oil temperature shall not exceed 100 ℃, in order to prevent the tempering of the bearings effect, reduce the hardness of the ring. 24-hour customer service hotline: if you are more interested in jiaxing bearing manufacturer introduces industry information or have any questions, please click on contact us page on the right side of the online customer service, or call:, you close the way of jiaxing bearing purchasing advisors. - - - - - - Editor: HRB bearing company sourcing consultant LTD. All rights reserved, The company) Reprint please indicate the source