6208 / HR22T2 with sealing material performance requirements of the non-standard bearings

6208 / HR22T2 with sealing material performance requirements of the non-standard bearing source: bearing | last updated: - 2020 06 - 23, 6208 / HR22T2 with sealing material performance requirements of the non-standard bearing with non-standard bearing performance of sealing material, the use of non-standard bearing factors mainly refers to the installation and adjustment, use and maintenance, maintenance and repair is in line with the technical requirements. According to the non-standard bearing installation, use, maintenance and maintenance of technical requirements, monitor and check the operation of the bearing load, speed, temperature, vibration, noise and lubrication conditions. To adjust to make it back to normal. The function of the non-standard bearing seal data is to ensure effective sealing, the first thing to do. First working conditions to choose seal data according to the sealing parts, such as operating temperature, working pressure, working medium and the motion, etc. Domestic non-standard bearing gap with foreign imports bearing is mainly used for pure radial load, also can bear radial load and axial load at the same time. When it suffered only pure radial load, the contact Angle is zero. Large non-standard bearing radial clearance, with the performance of angular contact bearings, can withstand a larger axial load. Non-standard bearings with low friction coefficient and high limit speed, especially under the condition of the axial load of high speed running, non-standard bearing is better than that of thrust ball bearing Sex. Non-standard bearings is a widely used the most representative of rolling bearing. On the structure, non-standard bearing every ring has a continuous groove raceway, the cross section is about a third of the ball equatorial circumference. Non-standard bearings is mainly used to bear radial load, can absorb a certain amount of axial load. When bearing radial clearance increases, it has characteristic of angular contact ball bearing, and can withstand the variations of axial load in both directions. Compared with other same size bearing, this kind of bearing small friction coefficient, extreme high speed, high precision. When the user selects, it is the preferred type of bearing. Non-standard bearing has simple structure, easy to use. It is a kind of imported bearing, has the largest production and the most extensive application scope.