Lubricating oil in the application of the bearing maintenance

Lubricating oil in the bearing maintenance main can have what effect? And bearing maintain what connection? The first is speed: the higher the speed of the transfigure into oil wedge, can choose low viscosity lubricating oil to ensure that the existence of the oil film. Selects the viscosity is too high, are produced by the impedance of the large, heat is larger and would result in a high temperature. Speed is slow, depends on the viscosity of oil to carrying load, should choose high viscosity of lubricating oil. Equipment lubrication work 'five set' filter 'three' is the daily lubrication technology management standardization, standardization, guarantee the effective method to do a good job of the equipment lubrication. Its content is: five: personal: to set good workers, workers lubrication of equipment lubrication part oil, add oil, and cleaning oil change of division of labor, individual, joint complete lubrication of equipment. Select the bearing load, the greater the average load lubricating oil viscosity is higher. How should consider oil load is of low speed and heavy loading. c。 Working temperature: the temperature difference is bigger, should choose high viscosity index of the product, work under high temperature conditions should be chosen with high viscosity and flash point, oily and oxidation stability is good, have corresponding oil additives. When the temperature is not high, the work should choose water with low viscosity, low solidifying point of less resistance to low temperature of the oil. Fixed: determine the lubrication part of each device and the lubrication points. Implementation of fixed point for oil. Qualitative: determine the equipment needed for the lubrication part oil varieties, grades and quality requirements, the oil quality must be qualified after test. Quantitative: make sure each time the number of fuel oil change to oil parts, the fuel consumption quota management and quantitative oil change. : on a regular basis to determine the lubrication parts add oil change period, in accordance with the provisions, cycle oil, add oil and washing oil change, for a large quantity of oil storage tank, in accordance with the provisions in the cycle of sampling test, determine the time of the next maintenance and work content. Working environment: water environment need to be aware of is should choose strong emulsification, oil and rust resistance good oil, dust dust seal should be paid attention to the larger environment. Some gas is corrosive, in this environment should choose a product with good corrosion resistance. (4) the lubrication of work to do, 'five set', 'three filter'