Jiaxing bearing point/cylindrical bearing correct installation method

There is rotational, have HRB bearing ( ) Jiaxing bearing group sales co. , LTD. ( The company) Is bearing group co. , LTD. Established in jiaxing spot sales window, specializing in HRB brand bearings, facing the whole country, the existing stock 50 million yuan, covers the whole bearing, have very strong spot supply, is the group's retail sales center. 1. Cold installation cooperate is not too tight little bearing installation, can be through a sleeve with hammering method, tapping the sleeve bearing is put into place. Should as far as possible even when knock the effect on the bearing ring, in order to prevent the bearing tilt or skewed. Most of the bearing pressure into the method for installation. If you would have a bearing inner and outer ring loaded on the shaft and bearing seat at the same time, must ensure that the same pressure effect on the outer ring, at the same time, and must be installed with the tool interface on the same plane. 2. Heat installation, normally for larger bearing installation, not by heating the bearing or bearing is impossible, because with the increase of the size, the greater the force needed for the installation. Heat installation needed between the bearing ring and the shaft or housing, the interference temperature mainly depends on the quantity and the diameter of the bearing fit place. Open type bearing heating temperature shall not exceed 120 ℃. Bearings with seals and dust cover is not recommended be heated to above 80 ℃ ( Shall ensure that the temperature does not exceed the seals and the allowed temperature grease) 。 Bearing heating, uniform heating, never can have local overheating. If you are looking for the above jiaxing bearing group co. , LTD. The author introduces the bearing inspection and replacement of interest or have any questions, please click on the website on the right side of the online customer service or call:, you close the way of jiaxing bearing purchasing advisors. - - - - - - Editor: jiaxing bearing sourcing consultant LTD. All rights reserved, The company) Reprint please indicate the source