How to lubrication maintenance INA bearing, bearing knowledge

German INA bearing, material of pure, high precision products, more than hundreds of thousands of varieties, widely used in different environments, and mechanical, known as the 'food machinery industry' the laudatory name, more than 80 years of INA bearings production experience the continue improvement of existing products, research and development of new products, always keep ahead in technology. INA bearings are widely used in all walks of life, its high speed, high precision of the spindle INA bearings, enjoys a high prestige in the machine tool industry. Good common features are reflected in all of the INA bearing, and has the high limit speed and bearing capacity and price. Lubrication has important influence on INA bearing of life, so we must apply the correct lubrication and maintenance methods. 1, oil bath lubrication oil bath lubrication INA bearings in ordinary lubrication method, suitable for low, medium speed, INA bearing lubrication. The INA bearing part of immersion in the slot, the INA bearing parts of lubricating oil by rotating, and then flow back to the oil level of oil tank should be slightly lower than the lowest at the center of the roller. 2, drip lubrication oil drip lubrication is suitable for need to ration oil INA bearing parts, drip oil every 3 - general A drop of it is advisable to 8 seconds, too much oil will cause INA bearing temperature increased. 3, circulating oil lubrication oil pump will filter the oil transfer to the INA bearing parts, through the INA bearing lubricating oil filter cooling after use. Because of the circulating oil can take away a certain quantity of heat, cooling the INA bearing, therefore method is suitable for high speed INA bearing parts. 4, spray lubrication with dry compressed air sprayer and lubricating oil mixed form oil mist, spray INA bearings, can effectively make the INA bearing cooling airflow and can prevent the intrusion. This method is suitable for high speed, high temperature INA bearing parts lubrication. 5, spray lubrication oil pump will come into your INA bearing high pressure oil through the nozzle, into the INA bearing of INA bearings at the other end into the oil in the tank. In the INA bearing high speed rotates, rolling element and cage with high rotate speed makes the surrounding air, the air in general lubrication method is difficult to be sent to INA bearing lubricating oil, use the method of high-pressure jet spray the lubricating oil must be taken to INA bearing, the position of the nozzle should be placed between inner ring and retainer center