The IKO outer spherical bearing equipment preventive maintenance

Of IKO bearing equipment preventive maintenance, operation and peripheral parts was removed when changing outer spherical bearing stop check, demand in judging the condition of bearing parts can use again and recorded using a good or bad. More serious investigation and the status of the bearing and appearance were removed is recorded. In order to explore the residual amount of investigation and smooth agent, after sampling, to clean the bearing well. Test results, if discover bearing damage and abnormal condition, please find out the reason according to bearing damage phenomenon, make countermeasures. In addition, the test results, there are some defects, if the outer spherical bearing cannot reoccupy, demand a change in the new bearing. Bearing in the practice of the damage can be reached before life is made up of IKO bearing wear, damage usually is not caused by fatigue, but by the bearing wear, corrosion and sealing damaged formation reason. But no matter the experiment in the laboratory or in practice, can be significant to see, the appearance of the work in the same premise the same outer spherical bearing, generally speaking, a third of the bearing damage resulting from the fatigue damage, a third of the bearing and resulting in smooth, a third of the other resulting from pollutants into the bearing device or improper disposal. Progress of bearing rotating accuracy, reduce IKO bearing vibration and noise of the experimental research has shown that the progress of the outer spherical bearing rotating accuracy, vibration and noise reduction and ring round to significantly reduce the has a lot to do. It's for the progress of a complete set of bearing load can be invented the good conditions. In addition, if bearing for rolling bearing raceway superfinishing except for the crown, can also progress bearing bearing ability. Superfinishing greatly advances the bearing performance and using life, is due to the function and effect of super fine dear there are so many, so more and more loved by bearing ring light the whole processing. Bearing clean: remove the outer spherical bearing repair, the appearance of the first recorded bearing, confirm the residual stock of smooth agent, sampling inspection with the smooth agent, after washing IKO bearings. Common use gasoline, kerosene as a cleaning agent. Bearing maintenance and discriminant: removed in order to distinguish the bearing can be able to use, check in the bearing after washing clean. Check the raceway surface, rolling surface, cooperate with the state, adhere to the wear condition, the increase of the bearing clearance and has nothing to do with dimension precision landing damage, abnormal. Bearing: the purpose of smooth smooth purpose of rolling bearings is to reduce the bearing internal friction and the friction losses, avoid burning stick. Hope that in front of the line device, just opened the shaft is smooth, not to clean, smooth filling grease directly. Also need not wash oil smooth smooth, ordinary, but, instrument with or high speed with IKO bearings, etc. , to wash with clean oil, remove the rust inhibitor on the outer spherical bearing.