Horizontal lathe hole inside the device

Horizontal lathe 2018 - hole device inside the car 09 - 27 Tang Haiqing xiao-yun tang ( Qinghai hua ding heavy machine tool co. , LTD. ) 1, the structure of the design inside hole device by stents, knife, lock screw and dowel, install screw, quick change and lifting bolt and other parts of the cutting tools, structure as shown in the appended drawings. Stents installed in the tool post front-end, knife installation hole in the center of the bracket. Knife seat mounting holes with side openings, through the screw locking, this knife holder facilitate installation and replacement, locking effect is better. Knife holder front end can be installed quickly in segment, can be configured according to the processing of a variety of cutting head. The device has simple structure, easy to use, need to process, through the mounting screw and dowel pin should be fixed to the head front end, the knife with lock screw locking, then fixed up quick change segment, can be carried out on the knife. Installation for the first time need to adjust the cutter center, with Gao Pingji machine tool center, determine the threaded hole and pin hole position, the second time when using corresponding screw hole for installation, the pin can be fixed. Processing is completed, will head to move to safe place, loosen the mounting screw and dowel, lifting by lifting bolt as a whole, can be removed the device. 2, the working principle of the device itself can not provide the power, is USES the power of machine tool to finish machining, first by fixed jaw to the workpiece, workpiece at the other end with a center frame support, chuck rotates, the power is passed on to the workpiece, the workpiece rotate movement, and then through tool rest vertical and horizontal movement and feed movement quickly, to achieve the fast movement of the cutting tool and feed movement, meet the conditions required for cutting. Prepare cutting, tool post fast moving to the right position, select the appropriate tool, after the knife cutting can be achieved. 3, conclusion the device processing, manufacturing is simple, easy to use, simple operation and safe and reliable, suitable for common horizontal lathe and CNC horizontal lathe, the shaft, disc parts center hole, the hole can be processed, and can extend the equipment processing function. On the basis of existing equipment can simple renovation, has a wide application range. Source: the metal processing: cold 14, 2017