The right choice and check bearing consumption of the importance of the process

In the process of industrial consumption bearing can be seen everywhere. Bearing is a process of cohesion, and bearing the mechanical load weight and consumption, good industrial bearings can let consumer process insist on running. They are behind the scenes hero, until finally the years of wear overwhelm it, people will see their pay, giving them their attention, and have to assign professional staff to stop the maintenance during downtime. Good operation of bearing, the foundation is the right choice of bearing, and properly keep bearing, guarantee the quality of bearing from fountainhead, let its in process exert its best performance in the process of consumption. Right of choosing the parameters of the bearing in accordance with the rules of equipment manufacturers in the document to select the correct bearing, this may be the most fundamental information bearing operation. Applying on its load bearing must be acceptable. In addition, the choice of appropriate bearing size is important, otherwise it will face the risk of premature bearing wear and bearing fault, of course, also should listen to the initiative of equipment and manufacturers. When demand change bearing, should choose equipment using the model, unless the equipment present problem needs a redesign. Bearing choice should also consider industrial operation environment, temperature and corrosion, etc. , make its can satisfy the need of running one of the biggest, especially at high speed and high temperature area, the suitable bearing to ensure the stable operation. Properly check bearing always, most of the factories to minimize inventory spare parts. After predictive and preventative maintenance, the factory can help identify potential problems, in order to maintenance, order and changing the bearing before downtime. Only when the demand order required parts, equipment, spare parts and bearing don't have to constantly on the shelves. But sometimes bearing and bearing equipment required storage in the factory workshop, under these conditions, is bearing placed on shelves, but because of the influence of the site environment, other equipment running around them, bearing will still be affected by vibration or corrosion. In other words, should check from time to time and rotary bearings. If not stop rotating bearing, bearing ring can produce indentation due to vibration in its appearance, this will cause premature problem. Or because of the corrosion of the gas in the air, cause bearing rust, unsmooth, may also affect the performance of the bearing. The right choice and check bearing is the first step in its work, the late device, to neutralize smooth may also affect its performance, but we need to start from the source, guarantee the quality of its original performance, talent better stop further operation.