Little knowledge sharing bearing lubrication bearings to you

Under some unique application standard, add a small amount of solid lubricant grease, such as adding 2 of 3-5% molybdenum disulphide can reduce damage, improve compressive strength of high temperature resistant ability to work, in view of the motor bearing high temperature, high vacuum pump, corrosion resistant, radiation protection, and its unique standard, ultra-low temperature, the solid lubricant adding rubber products or raw materials of powder metallurgy, but make it with self-lubricating bearing performance of the motor parts, such as the solid lubricant with adhesive bonding in the motor bearing retainer, the channel and the roller body, produce plastic film lubrication, have certain effect to reduce the friction and damage. A lubricant fill and replaced. Grease fill time interval for mechanical equipment, embrittlement and environmental pollution, should fill in bearing with lubrication base will slowly lose its lubrication performance. Therefore, the lubrication rank need to continue to fill and upgrade. Lubricant fill time interval can produce, because of the bearing ratio and different specifications and rotational speed, and on the basis of running time must fill the probably time interval of the grease. In addition, when the bearing temperature exceeds 70 ℃, each bearing temperature 15 ℃, will need to apply the fill time interval to reduce half of the grease. When two sides enclosed motor bearing manufacturing into fat already, 'a total operating temperature category and other performance is suitable for the required places, and fill in the amount of fat and bearing size relatively also, generally beyond the service life of the bearing, could the fat in addition to the unique place, do not need to fill the grease. b。 Motor bearing lubricating oil conversion cycle time lubricating oil conversion cycle time due to the application standard and residual oil, general conditions, the operating temperature of 50 ℃ for the following, the dust under the good atmosphere of less applications, moved around once a year, when the water temperature to 100 ℃, to 3 months or more in the short term conversion at a time. The above is the content of the author to share today, want to learn more bearing small knowledge, pay attention to the bearing's official website.