Jiaxing bearings how to dismantle the ceramic bearing

Jiaxing bearing group sales co. , LTD. , is the spot sales center of jiaxing bearing factory, specializing in HRB bearings, application in production design and related machinery has a wealth of technical experience, today we are together and we learn how to dismantle the ceramic bearing. How to dismantle the ceramic bearing? Here are four removal methods, tapping method: general tapping force on the bearing inner ring, should not add the tapping force on the bearing of the moving body and keep on the shelf, this method is simple, but easy to damage the bearing, when bearing, at the end of the shaft, use less than the copper rod of bearing inside diameter or other soft metal materials resist shaft end, lower bearing block, light and small hammer tunk, can be removed. Second, the push method: press thrust bearing, stable and reliable, also do not damage the machine and bearing shielding room. Hydraulic press, manually pull or push mechanical press. Three, thermal method: used to remove the interference fit of bearings. Control will be heated to a baidu first oil in oil pot pouring in to dismantle the bearing, after waiting for bearing ring heat expansion, can be used to pull pull the bearing. Four, pulling method: adopting the special puller, remove, as long as the rotating handle, self-lubricating bearing will be slowly. Remove the bearing outer ring, pull two foot corners should open outward; Remove the bearing inner ring, with both feet should be inward, card on the bearing inner ring end face. If you are interested in the above jiaxing bearing factory introduction of HRB bearing or have any questions, please click on contact us page on the right side of the online customer service, or call: 4006578186, jiaxing bearing retail center you full thoughtful procurement consultant. - - - - - - Editor: jiaxing bearing sourcing consultant LTD. All rights reserved, Jiaxing bearing factory) Reprint please indicate the source