6015-2rs Bearings

6015-2RS bearings

The dimensions of the 6015-2RS bearing are an inner diameter of 75mm, an outer diameter of 115mm, and a thickness (height) of 20mm. ‌ This kind of bearing is a deep groove ball bearing, ‌ produced by SKF in Sweden, ‌ and has a wide range of uses. ‌It can be used in a variety of equipment and machinery, ‌including but not limited to butterfly valves, ‌vehicle instruments, ‌API equipment and machinery, ‌field strength meters, ‌mechanical presses, ‌solenoid valves, ‌drug testing equipment, ‌Cutting and welding equipment, ‌plug valves, ‌pipe fittings and pipes, ‌field operating machinery, ‌knife belts, etc. 1. ‌

The design features of the 6015-2RS bearing include single-row, low-friction seals on both sides, good versatility, and the ability to withstand radial loads and bidirectional axial loads. ‌Its low friction and optimized ‌reduce noise and vibration,‌ resulting in higher rotational speeds. ‌The embedded seal design can significantly extend the service life of the bearing,‌because it effectively prevents grease leakage and contaminant ingress2. ‌

In addition, the detailed parameters of the ‌6015-2RS bearing also include the rated load (‌KN)‌, of which the dynamic load is 41.6 and the static load is 33.5. ‌In terms of lubrication, ‌the reference speed (‌rpm) of this bearing ‌ is 6000 under grease lubrication conditions, ‌ while the limited speed under oil lubrication conditions is 12000