Submit successfully
We will review as soon as possible
Type:Axial angular contact ball bearing
Item number:ZKLF100200-2Z-XL
Weight:8.372 kg
Axial angular contact ball bearing
Axial angular contact ball bearings ZKLF..-2Z, double direction, for screw mounting, gap seals on both sides
| d | 100 mm | Bore diameter | d1 | 132 mm | Rib diameter inner ring | |
| 0 mm | Bore diameter upper tolerance | rmin | 0.6 mm | Minimum chamfer dimension | ||
| -0.008 mm | Bore diameter lower tolerance | r1 min | 0.6 mm | Minimum chamfer dimension | ||
| D | 200 mm | Outside diameter | J | 175 mm | Pitch circle diameter fixing holes | |
| 0 mm | Outside diameter upper tolerance | d2 | 11 mm | Fixing holes diameter | ||
| -0.015 mm | Outside diameter lower tolerance | b | 3 mm | Width of extraction slot | ||
| B | 55 mm | Width | I | 45 mm | Distance of extraction slot | |
| 0 mm | Width upper tolerance | n | 8 | Pitch quantity of fixing holes | ||
| -0.25 mm | Width lower tolerance | t | 45 ° | Pitch separation angle of fixing holes | ||
| Ca | 154,000 N | Basic dynamic load rating, axial | a | 60 ° | Contact angle | |
| C0a | 435,000 N | Basic static load rating, axial | ||||
| Cua | 23,000 N | Fatigue load limit, axial | ||||
| nG Grease | 3,300 1/min | Limiting speed for grease lubrication | ||||
| nϑ | 2,150 1/min | Thermally safe operating speed | ||||
| MR | 2.6 Nm | Bearing frictional torque | ||||
| ≈m | 8.372 kg | Weight | ||||
| Da max | 150mm | Maximum diameter of housing | ||||
| da min | 128mm | Minimum diameter shaft | ||||
| t1 | 0.2mm | Position tolerance of bore in the housing | ||||
| M10 | Size of fixing screws | |||||
| na | 8 | Number of holes in adjacent construction | ||||
| ta | 45 ° | Pitch separation angle of holes in adjacent construction | ||||
| M6 | Connection thread for lubrication | |||||
| Temperature range | ||
| Tmin | ‘-30°C | Operating temperature min. |
| Tmax | 120°C | Operating temperature max. |
| Additional information | ||
| caL | 1,900N/µm | Rigidity axial |
| ckL | 5,800N/µm | Tilting rigidity |
| Mm | 85.3kg*cm2 | Mass moment of inertia |
| 3µm | Axial runout | |
| ZMA100/140 | Recommended INA precision locknut for radial locking | |
| AM100 | Recommended INA precision locknut for axial locking | |
| MA | 250Nm | Tightening torque for the recommended INA precision locknut |
| 25,624N | Required locknut force axial |
Zhejiang waxing electromechanical co.LTD.
Copyright © 2019 Zhejiang waxing electromechanical co.LTD. | All Rights Reserved Design
Hello, please leave your name email or WhatsApp here before chat online so that we won't miss your message and contact you smoothly.
CONTACT US
Consult our customers for surprise discounts.